Design and testing of bored pile foundation to （螺旋桩基础的设计和测试）.pdf

Design and testing of bored pile foundation to the 2nd Penang Bridge, Malaysia By Sing-lok CHIU, AECOM Zheng-ru Fang, CHEC Construction (M) Sdn Bhd (CHEC) Kang HUANG, China Highway Planning and Design Institute (HPDI) Presented by Dr SL Chiu Technical Director, Geotechnical Hong Kong AECOM November 16 2011 Page 1 Contents •Overview of bored pile design approaches •Design of bored piles for the 2nd Penang Bridge •Site characteristics •Design and instrumentation of the trial bored pile •Static load test on the trial bored pile •Test results •Conclusion 16 November 2011 Page 2 2nd Penang Bridge under construction Cable-stayed section of the 2nd Penang Bridge over the main navigation channel 16 November 2011 Page 3 Pier P25 Pier P26 240 m 150m x 30m batu kawa 21 bored piles of 2.0 ~ 2.3 m in diameter and socketted in to sound granite bedrock at about 110m deep below sea bed 16 November 2011 Page 4 Overview of bored pile design approaches The load resistance capacity of a bored pile is mainly derived from the pile shaft and base resistances (Whitaker, 1976): Q ultimate = Q shaft + Q base 16 November 2011 Page 5 Given that: •There are different resistance and settlement relationships of the shaft and base •It is advisable that different load factors be appli