ELECTRIC COMPRESSOR WITH HIGHSPEED （电动压缩机用高速）.pdf

DEVELOPMENT SUPeRCHARgIng ELECTRIC COMPRESSOR WITH HIGH-SPEED BRUSHLESS DC MOTOR Moving Magnet Technologies (MMT) from Besançon in France has developed a highly effi cient brushless DC motor that is especially suitable for use in electrically supported compressors. It helps to further minimise so-called turbo lag in supercharged internal combustion engines. The following report presents technical details of the electric motor and practical results in combination with an electrically driven compressor. MMT was supported by Swissauto in designing the supercharging system. 50 AUTHORS an automotive compressor for the first performance levels were defined at a time [2]. However, they were only able to mechanical output of 2 kW and 80,000 rpm. take basic measurements in their own A supply voltage of 48 V was selected. laboratory owing to the need for more specific equipment in order to accurately BRUSHLESS MOTOR TECHNOLOGY simulate the overall system (including measurement of mass flow and compres- Over the last 20 years, MMT has man- DR.-ING. STEPHAN BIWERSI sion ratio). In addition to this, the motor aged to fine-tune the electric motors it is Chief Operating Officer at Moving was not ideally suited to the type of com- develops to create structures that not Magnet Technologies (MMT) in pressor wheel in use. only