SMARTFORM字段参数设置和系统变量.doc

Output Options for Field Contents? Use the Formatting options to adapt the value of a field before printing it. You can enter the relevant parameters directly behind the field name. Make sure to write the short forms of the different options in uppercase letters. Some of the options can be combined. General Information The formatting options are not suited for all data types of fields (for example, for character fields you need no exponential representation). You must distinguish between numeric fields and character fields. Numeric Fields If specified, the system first evaluates the length (length). If no length is specified, the system displays the value in its overall length. The trailing blank indicates a positive sign. To suppress it, use formatting option S . Any offset offset specified is ignored. Sequence of evaluation: (length), sign to the left( ),Japanese date (L), suppress blanks (C), right-justified display (R), insert fillers (F). Character Fields By default, the system displays the value of a field in its overall length, but truncates trailing blanks. Sequence of evaluation: suppress blanks (C), offset and (length), right-justified display (R), insert fillers (F). Overview Formatting Options for Fields Syntax Description field+offset Skips offset places of the field value (character fields only). If the offset is greater than the length of the value, nothing is displayed. field(length) Sets the output length to length. field(*) If the field is defined by a Data Dictionary type, Smart Forms set the output length to the value specified there. field(S) Suppresses the sign field() Displays the sign to the left of the number field(.nat.number) Limits output of decimal places to nat.number field(Enat.number) Displays the field value with the fixed exponent nat.number. The mantissa is adapted to this exponent by shifting the decimal character and inserting zeros. field(T) Suppresses thousand indicators when displaying fields of types DEC , CURR , INT ,