35 kV 系统双母线TV 二次电压非正常并列事故原因 - 内蒙古电力技术.PDF

内蒙 古 电力技 术 104 INNER MONGOLIA ELECTRIC POWER 2012 年第30 卷第4 期 35 kV 系统双母线TV 二次电压非正常并列 事故原因分析及防范措施 王永胜，苏智东，韩海英 （乌兰察布电业局，内蒙古 乌兰察布 012000） 摘要：针对35 kV 系统双母线电压互感器二次电压切换不成功造成插件烧毁的故障，结 合电压切换原理，分析了事故原因是由于刀闸辅助接点不通，使双位置继电器不能可靠复归， 造成两TV 二次电压非正常并列，引发事故。提出应尽量避免双母线分列运行，加强对刀闸辅 助接点的维护以及考虑采用单位置继电器等防范措施。 关键词：35 kV 系统；双母线；电压切换；单相接地；二次电压并列；双位置继电器 文献标志码：B 文章编号：1008 －6218 （2012 ）04 －0104 －03 Cause Analysis and Preventive Measures of TV Secondary Voltage Abnormal Concatenation in 35 kV Double-bus System Wang Yongsheng, Su Zhidong, Han Haiying （Ulanqab Power Bureau, Inner Mongolia Ulanqab 012000） Abstract ：For the fault of plug-burning result from voltage transformer secondary voltage switch unsuccessful in 35 kV double-bus system, combining of the voltage switch principle, the paper analyzed the cause of the fault, which is disconnected switch auxiliary contacts connected failure, results in the two position relay cant return reliably and the two voltage transformers secondary voltage non-normal concatenation, and than leaded to the fault. In the paper, some preventive measures were proposed finally, preventing from the double-bus separated operation, improving maintain of the disconnected switch auxiliary contacts and considering of using the single position relay. Key words ：35 kV system; double-bus; voltage switch; single phase grounding; secondary voltage concatenation; two position relay 0 引言 （以下简称TV ）二次电压回路与保护元件所在母线 一致，装置的电压回路需在母线刀闸操作的同时也 电压切换装置主要用于采用双母线接线方式