Generation of acoustic selfbending and bottle （代声selfbending和瓶子）.pdf

ARTICLE Received 14 Oct 2013 | Accepted 5 Jun 2014 | Published 3 Jul 2014 DOI: 10.1038/ncomms5316 Generation of acoustic self-bending and bottle beams by phase engineering 1, 1, 1, 1 1,2 1 1,2 1,2 Peng Zhang *, Tongcang Li *, Jie Zhu *, Xuefeng Zhu , Sui Yang , Yuan Wang , Xiaobo Yin Xiang Zhang Directing acoustic waves along curved paths is critical for applications such as ultrasound imaging, surgery and acoustic cloaking. Metamaterials can direct waves by spatially varying the material properties through which the wave propagates. However, this approach is not always feasible, particularly for acoustic applications. Here we demonstrate the generation of acoustic bottle beams in homogeneous space without using metamaterials. Instead, the sound energy flows through a three-dimensional curved shell in air leaving a close-to-zero pressure region in the middle, exhibiting the capability of circumventing obstacles. By designing the initial phase, we develop a general recipe for creating self-bending wave packets, which can set acoustic beams propagating along arbitrary prescribed convex trajectories. The measured acoustic pulling force experienced by a rigid ball placed inside such a beam confirms the pressure field of the bottle. The demonstrated acoustic bottle and self-bending beams have potential applications in medical ultrasound imaging, therapeutic ultrasound, as well as acoustic levitations and isolations. 1 National Science Foundation Nanoscale Science and Engineering Center, 3112 Etcheverry Hall, University of California, Berkeley, California 94720, USA. 2 Materials Sciences Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, Cali