Guidelines for the Application of Load and （应用程序负载和指南）.pdf

Application of load inflation tables Guidelines for the Application of Load and Inflation Tables This guide is intended to provide assistance in utilizing load and inflation tables when replacing tires with optional tire sizes including “plus sizes” that may not be listed on the vehicle’s tire information placard (T.I.P.) or in the owner’s manual. For inflation pressure recommendations for the original equipment (OE) size, refer to the tire information placard (T.I.P.) or owner’s manual. The T.I.P. is commonly found on the vehicle door edge, door jam, glove-box door, or inside of the trunk lid. For more information on the proper selection of replacement tires, refer to our tire safety section on our website, . IMPORTANT! Refer to the vehicle owner’s manual for any specific safety advice regarding the application of replacement tires. Guidelines Tire Standards 62 ISO Metric (Metric or Hard Metric) vs. P-metric 63 Single/Dual Load 64 Cold Inflation Pressure 64 Standard Load vs. Reinforced (RD) or Extra Load (XL) 64 P-Metric or Hard Metric tires on Light Trucks 65 Speed Ratings 66 Basic Procedures for reading and applying the load inflation tables: 67 P-Metric to Metric 68 LT-metric to LT-Metric