INGRESS PROTECTION REFERENCE CHART - （参考图进入保护）.pdf

INGRESS PROTECTION REFERENCE CHART EN 60529 outlines an international classification system for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of foreign bodies (i.e. tools, dust, fingers) and moisture. This classification system utilizes the letters “IP” (“Ingress Protection”) followed by two or three digits. (A third digit is sometimes used. An “x” is used for one of the digits if there is only one class of protection; i.e. IPX4 which addresses moisture resistance only.) Degrees of Protection - First Digit The first digit of the IP code indicates the degree that persons are protected against contact with moving parts (other than smooth rotating shafts, etc.) and the degree that equipment is protected against solid foreign bodies intruding into an enclosure. FIRST  NUMBER TEST 0 No  special  protection   FIRST  NUMBER TEST Protection  from  a  large  part  of  the  body  such  as  a  hand  (but  no  protection  from  deliberate  access);  from  solid   1 objects    greater  than  50mm  in  diameter.   0 No  special  protection   2 Protection  against  fingers  or  other  object  not  greater  than  80mm  in  length  and  12mm  in  diameter.   Protection  from  a  large  part  of  the  body  such  as  a  hand  (but  no  protection  from  deliberate  access);  from  solid   1