Installation Starting Guide（安装和启动指南）.pdf

WiFi Video Doorbell Installation Starting Guide SkyBell works with the majority of existing home power standards around the world and with 95% of existing wired doorbell wires. SkyBell is designed to work with the power that is connected to your current doorbell and is connected to a low- voltage transformer, no matter if you have a 110/120 VAC or 220/230/240 VAC power standard. SkyBell can only be attached to a low voltage transformer (8-36 VAC or 12 VDC) and not directly to primary power (110/120 VAC and 220/230/240 VAC). Questions? Want to see a video? Visit www.SkyB/support. WARNING Risk of electric shock. Do not attempt to install SkyBell in wet conditions. Do not proceed if you, SkyBell or the area around your door is wet. SkyBell can only be attached to a low voltage transformer (8-36 VAC or 12 VDC) and not directly to primary power (110/120 VAC and 220/230/240 VAC). 1 SkyBell Components Infrared LED (Night Vision) Camera Camera Positioning Hole LED Indicator Motion Sensor Button Microphone Speaker Set Screw Advanced Components Motion sensors detect a visitor. LED button tells you if SkyBell is disconnected from Wi-Fi. Infrared technology lets you see at night.