INSTRUCTIONS - COMP Cams（指令COMP凸轮）.pdfVIP

INSTRUCTIONS Camshaft Installation and Degreeing Instructions 4.6-Liter 4 Valve Engines Thank you for choosing COMP Cams® products; we are proud to be your manufacturer of choice. Please read this instruction sheet carefully before beginning installation, and also take a moment to review the included limited warranty information. This instruction sheet is broken down into several categories for ease of use. Some of the topics may not apply to every application, but all of the information will be very beneficial during the cam installation process. If there are any questions or problems during the installation, please do not hesitate to contact the toll free CAM HELP® line at 1-800-999-0853, 7 a.m. to 8 p.m. CST Monday through Friday. Camshaft Installation Step 1: Prepare a clean work area and assemble the tools needed for the camshaft installation. The use of an automotive manual is strongly recommended for help in determining which components must be removed from your engine in order to expose the camshafts, camshaft sprockets and timing chain assembly. A good, complete repair manual will save both time and frustration during the installation of your new camshaft set. Step 2: Remove the intake manifold and valve covers from the motor. Step 3: Remove spark plugs, crank pulley, damper and engine front cover. Step 4: Remove the primary timing chains and outer camshaft sprockets. Step 5: Remove the secondary timing chain assemblies after relieving the tension on the secondary drive assembly by depressing the plunger and inserting a pin to lock it in place. Step 6: Rotate the crankshaft keyway counterclockwise 90° from 12 o’clock (to about the 9 o’clock position). Note that this step is vital in order to