Introduction to Photovoltaic Systems Maximum （介绍光伏发电系统最大）.pdfVIP

Application Report SLVA446– November 2010 Introduction to Photovoltaic Systems Maximum Power Point Tracking Dave Freeman ABSTRACT Photovoltaic (PV) systems have been used for many decades. Today, with the focus on greener sources of power, PV has become an important source of power for a wide range of applications. Improvements in converting light energy into electrical energy as well as the cost reductions have helped create this growth. Even with higher efficiency and lower cost, the goal remains to maximize the power from the PV system under various lighting conditions. 1 Introduction The power delivered by a PV system of one or more photovoltaic cells is dependent on the irradiance, temperature, and the current drawn from the cells. Maximum Power Point Tracking (MPPT) is used to obtain the maximum power from these systems. Such applications as putting power on the grid, charging batteries, or powering an electric motor benefit from MPPT. In these applications, the load can demand more power than the PV system can deliver. In this case, a power conversion system is used to maximize the power from the PV system. There are many different approaches to maximizing the power from a PV system, these range from using simple voltage relationships to more complex multiple sample based analysis. Depending on the end application and the dynamics of the irradiance, the power conversion engineer needs to evaluate the various options. 2 Photovoltaic Operation