Journal of Materials Processing Technology（材料加工技术杂志》上）.pdfVIP

Journal of Materials Processing Technology 210 (2010) 2103–2118 Contents lists available at ScienceDirect Journal of Materials Processing Technology j o u rn al h omepage: w w w. elsev /locate/jmat protec A review on hot stamping H. Karbasian ∗ , A.E. Tekkaya Institute of Forming Technology and Lightweight Construction, Dortmund University of Technology, Baroper Str. 301, D-44227 Dortmund, Germany a r t i c l e i n f o a b s t r a c t Article history: The production of high strength steel components with desired properties by hot stamping (also called Received 29 October 2009 press hardening) requires a profound knowledge and control of the forming procedures. In this way, the Received in revised form 15 July 2010 final part properties become predictable and adjustable on the basis of the different process parameters Accepted 19 July 2010 and their interaction. In addition to parameters of conventional cold forming, thermal and microstruc- tural parameters complicate the description of mechanical phenomena during hot stamping, which are essential for the explanation of all physical phenomena of this forming method. Keywords: In this article, the state of the art in the thermal, mechanical, microstructural, and technological fields Hot stamping High strength steel of hot stamping are reviewed. The investigations of all process sequences, from heating of the blank to 22MnB5