Linear low density polyethylene (LLDPE) （线性低密度聚乙烯(LLDPE)）.pdfVIP

Environmental Product Declarations of the Euro ean Plastics Manufacturers Li ear low de sity polyethyle e (LLDPE) Introduction (EC 2006) This Environmental Product Declaration (EPD) is based upon life cycle inventory (LCI) data from PlasticsEurope’s Eco-profile programme. It has been prepared according to ISO 14025 and PlasticsEurope’s Product Category Rules (PCR) for U compou ded Polymer Resi s a d Reactive Polymer Precursors ( une 2006) . EPDs provide environ- mental performance data, but no information on the eco- nomic and social aspects which would be necessary for a complete sustainability assessment. Further, they do not imply a value judgment between environmental criteria. This EPD describes the production of the LLDPE polymer Gas phase polymerisatio : A gas phase reactor is from cradle to gate (from crude oil extraction to pellets essentially a fluidised bed of dry polymer particles coming out the manufacturing plant) . It is importa t that maintained either by stirring or by passing gas (ethylene) compariso s ca ot be made o the level of the polymer at high speeds through it. Pressures are usually relatively material alo e: it is necessary to consider the full life low at ~2MPa and temperatures are usually in the range cycle of an application in order to compare the perform- of 70-110°C. The molten polymer is mixed with stabilizers ance of different materials and the effects of relevant life and g