MARLIN CM614 WOOD CARVER Terrco Inc（马林cm 614木刻家 Terrco Inc .）.pdfVIP

MARLIN CM-614 WOOD CARVER The versatile Terrco® Marlin Wood Carvers are available in two sizes, each having a different carving range. The most popular model is the CM-614. The CM-614 is ideal for sign carving, plaques and violin making. The model CM-624 is used by guitar and cello makers, boat builders and of course sign carvers. If you enjoy woodworking and wish to produce profitable items, a Terrco® Marlin Carving Machine may be just what you need! Our patented 3-D duplicating carvers are very easy to use and maintain and do not require an experienced operator. The Marlin machines reproduce in a 1 to 1 ratio and will duplicate any part of an object that the stylus can come in contact with. These industrial-quality machines are sturdily built from accurately machined aluminum castings with steel shafts and counterweight. Linear ball bearings are used on hardened shafts that are ground and polished. The aluminum support tube rotates on Delrin roller bearings. The machines are shipped partially assembled, and are easily installed on the machine base. Our machine bases are 3/4” thick laminated panels mounted on 2” x 2” skids. We provide the necessary drawings should you wish to fabricate your own machine base from 3/4” to 1” thick particle board or plywood. Machine bases are not provided with CM series machines. The router arm castings are machined to accept any router motor that has a 3-1/2” diameter barrel. CM-614 Carving Range 12” x 28” Depth of Cut Up to 3” Distance between Router Bit and Stylus Tip 14” Carriage Travel 29” Material Width 14” Max Material Length Unlimited Machine Base (Size Required) 36” x 60” Shipping Weight 48 lbs.