NIULPE PE 1st Class R3 091009（091009年NIULPE PE一级R3）.pdfVIP

National Institute for the Uniform Licensing of Power Engineers, Inc. PO BOX 16369 Pittsburgh, PA 15242-0369 PH: 888.648.5566 Fax: 888.648.5577 email: info@ NIULPE, INC. (NATIONAL INSTITUTE FOR THE UNIFORM LICENSING OF POWER ENGINEERS, INC.) REFERENCE SYLLABUS For FIRST CLASS POWER ENGINEER Introduction This syllabus has been approved by the NATIONAL INSTITUTE FOR UNIFORM LICENSING OF POWER ENGINEERS, INC. (NIULPE) This Syllabus is intended to assist candidates studying for the First Class Power Engineer Examination. Recommended Study Program: It is recommended that, before undertaking this examination, the candidate completes the First Class Power Engineering Course offered through a recognized technical institute or training provider. In addition to the foregoing course, it is recommended that the candidate becomes familiar with the publications listed in the Reference Material for Power Engineering Students and Examination Candidates, which is obtainable from the various technical institutes or from the NIULPE Website. 06-105 R3 09/10/09 © 2005 – 2009 NIULPE, INC. Page 2 of 7 REFERENCE SYLLABUS FOR FIRST CLASS EXAMINATION CANDIDATES 1. Principles of Applied Fluid Mechanics a) Explain principles, terminologies, and perform advanced calculations in the following: b) Work, power, and efficiencies of lifting machines c) Potential and kinetic energy; energy conservation d) Impulse and momentum; conservation of momentum; angular momentum e) Centripetal for