PERFORMANCE EVALUATION OF THE EFFECT OF （绩效评估的影响）.pdfVIP

International Journal of Computer Networks Communications (IJCNC) Vol.6, No.5, September 2014 PERFORMANCE EVALUATION OF THE EFFECT OF NOISE POWER JAMMER ON THE MOBILE BLUETOOTH NETWORK 1 2 Adil H. M. Aldlawie and Ghassan A. QasMarrogy 1,2Communication and Computer Engineering Department, Cihan University, Erbil, Iraq ABSTRACT Network jammers can uncover the reliability of the wireless networks, where the position of the jammer node permit the network to cope with jamming leveraging varieties of defence strategies. Wireless Bluetooth network is a short range network, where the Bluetooth transceiver is operating in the 2.4 GHz ISM (industrial, scientific and medical) radio band, and a special type of frequency hopping pattern was included with the specification of the Bluetooth technology to offer the necessity requirement for the matching Radio Frequency RF channels. This paper calculates and evaluates the effect of noise power jammer and follower jammer on the Personal Area Net work (PAN) Bluetooth network. The results prove that the effect on the Bluetooth network depends on many factors such as power density, distance and immunity technique, which is used in many Bluetooth networks. KEYWORDS PAN, Bluetooth Network, Jammer technology, Sweep jammer, Mobile equipment 1. INTRODUCTION Due to the limited number of unauthorized frequency bands, and the growing extensiveness demand on the wireless network technologies, will cause a swarming environment full of radio signals that leads to unintentional interfere