Placard Adjusting Fact Sheet Bartec USA（招牌调整简报Bartec美国）.pdfVIP

The TPMS PRO SERIES From The TPMS Professionals Placard Adjusting Fact Sheet The Tech400Pro Tech500 TPMS Scan Tools can now adjust the TPMS Placard Value! Must have software 53 or newer loaded When plus sizing on some vehicles, a change in recommended tire pressure is needed to maintain the original equipment load rating. Current Placard Coverage On vehicles equipped with TPMS, a change in the Placard Pressure Value [the air pressure value by which the “low pressure” indication is determined] is needed to insure the system remains operational. Example: 2014 Ford F-150 with 265/70-R18 OE would be 35psi placard. If Plus size to 305/35-R24 (Plus six) the new Placard Value would need to be 42psi TEST BEORE TOUCH USE TOOL TO SET PLACARD VERIFY and PRINT AUDIT REPORT ATTACH NEW PLACARD LABEL Fill in new information on the supplemental placard Attach the supplemental placard close to the original placard label Placard Label Rolls can be ordered from your Bartec Distributor [25 per roll and 100 per roll sizes] WRTPLACARD25 and WRTPLACARD100 Designed, built and SUPPORTED by the TPMS PROFESSIONALS at Bartec The TPMS PRO SERIES From The TPMS Professionals Placard Adjusting Fact Sheet TOOL SCREEN FLOW N tice: o determine new Home Toolkit o T Reading VIN Data P acard Change **********VIN Read********** Test Before You Touch l Placa