7637瞬态辐射-TUN测试报告-菲利浦项目Test result notification-02_CE.pdf

Quality Assurance and Control, Industrial Safety, Consumer Product Safety, Environmental Protection, Nuclear Safety, Vehicle Safety Conducted emission test result notificatipon Test minutes concerning emission of ESA(s) to conducted disturbances by Appendix 1 ESA(s) according to Annex X of the Directive 72/245/EEC (incl.2006/96/EEC) Test details Conditions while testing : The general requirements of paragraph 1 of Annex X have been met. The ESA conditions of particular interest in the measurements are the turn on and turn off. Test method : The general and specific test requirements were in compliance with paragraph 3 of Annex X. Test results Ten waveform acquisitions are done, but only those waveforms with the highest positive and negative amplitude were recorded. Maximum allowed value Measured pulse amplitude Polarity of pulse amplitude For vehicle with 12V systems (V) True value (V) Positive + 75 + 12.9 Negative - 100 Failed (see next page) Test condition: test voltage : 12.5V EUT operation mode: CD palying details ref er to ISO 7637-2 :2002) We appreciate your kind support and would like to offer our assistance and continuous services in future. When contacting our office, please refer to our reference above. Yours sincerely, TÜV Rheinland (Guangdong) Ltd. Homologation