无机富锌车间底漆用途.docVIP

Intended Uses 用途 一种在储存、建造及装配过程中，用于经喷砂清洁的钢板或其他钢结构提供短到中期保护的车间底漆，专为自动喷涂线而设计。 As a shop primer, it is suited for painting the steel plate especially which is blasted, it can protect the steel structure for a short or middle time during the stroage, construction and fabrication, It is specially designed for the auto-spray equipment. Product Information产品简介 二罐装含硅酸乙酯车间底漆、灰色。具有耐候性、焊接及切割性能好、烧伤面积少、耐热性佳、保护期强。 Two packages, contains zinc tetraethyl silicate, gray, Excellent resistance to deterioration on Weathering, weding and cutting-through property, ablation resistance, heat-resistance and long time protection. Application details 产品数据 Volume Solids 固体份 ≥28 Dry Flm Thickness干膜厚度 15-20 microns, according to the protected period 15-20微米，视保护期限要求 Theoretical Coverage 理论涂布率 14.36 m2 /Kg Practical Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Storage and Handling 施工详述 Mix Radio 混合比 A : B=2:1(by weight) 甲:乙=2:1 Method of Application 施工方法 Airless Spray 无空气喷涂 Recommended 推荐采用 Brush or Roller 涂刷或辊涂 Suitable, only for repairing 可以采用，仅限于修补 Conwentional Spray 传统喷涂 Adoptable, but thinning and stirring are Necessary 适用，需稀释，使用带搅拌器的适当设备 Thinner 稀释剂 SC007 Cleaner 油漆设备清洗剂 SC007 Pot Life 使用期 5℃:10 h ； 20℃ 8小时 ； Storage 贮存期 six months 6个月 Drying time 干燥时间 Substrate Temperature底材温度 Touch Dry 表干 （min） Hard Dry 硬干 （h） Over coating Interval 覆涂间隔 Min最短 Max最长 25 1-3 3-5 5 hours 小时 / 无机富锌车间底漆 无机富锌车间底漆的用途 Storageand Handling 贮存与管理 Storage 贮存 Store in cool and dry conditions 贮存于阴凉干燥处 Pack size 包装规格 A;18 Kg in 20 liter container 甲:18公斤装于20公升容器中 B:9 Kg in 10 liter container 乙:9公斤装