PV连接器和接线盒标准介绍_090313.pdf

TÜV SÜD China PV TÜV TEC TÜV SÜD Group Beijing Branch TEC Division TÜV SÜD Group TEC 12 March 2009 TÜV SÜD China PV V DIN V VDE V 0126-3 Connectors for photovoltaic systems – Safety requirements and tests PV V DIN V VDE V 0126-5 Junction boxes for photovoltaic modules PV TÜV SÜD Group TEC 12 March 2009 V DIN V VDE V 0126-3:2006 V DIN V VDE V 0126-3:2006 Connectors for photovoltaic systems – Safety requirements and tests PV Scope • This Standard applies to connectors of application class A according to IEC 61730-1 for use in photovoltaic systems with rated voltages up to 1 000 V DC and rated currents up to 500 A per contact. • This standard applies to connectors without breaking capacity but might be engaged and disengaged under voltage. • Note: For connectors according to class B and C of IEC 61730 as well as for protection for class II equipment intended between 0 and 50V DC for use in photovoltaic-systems this standard may be used as a guide. TÜV SÜD Group TEC 12 March 2009 V DIN V VDE V 0126-3:2006 V DIN V VDE V 0126-3:2006 A B C D EIP F TÜV SÜD Group TEC 12 March 2009 V DIN V VDE V 0126-3:2006 A A1 a) ; b) type ; c) rated current (A); d) rated voltage (V); e) rated impulse voltage (kV), ; f) pollution degree 2; g) protection degree, IP 55, IP 66, IP 67; TÜV SÜD Group TEC 12 March 2009 V DIN V VDE V 0126-3:2006 h) ambient temperature range -40°C - +85°C upper limiting temperature (ULT) l