热矫初始温度分布对TMCP钢板残余应力的影响.pdfVIP

Vol.26 No.4 安徽工业大学学报 第26 卷 第4 期 October 2009 J. of Anhui University of Technology 2009 年 10 月 文章编号：1671-7872 （2009）04-0345-05 热矫初始温度分布对TMCP 钢板残余应力的影响 1, 2 1, 2 1, 2 3 李胜祗 ，李 珺 ，刘 宇 ，贺达伦 (1.安徽工业大学材料科学与工程学院，安徽马鞍山243002 ；2.安徽省高校金属材料与加工重点实验室，安徽 马鞍山243002 ；3.宝钢厚板厂，上海201900) 摘要: 钢板残余应力分布决定着纵切板条的侧弯量，研究钢板残余应力分布是预报板条侧弯量的基础。借助商用有限元软件 MSC.SuperForm 对TMCP 钢板热矫+ 自然冷却过程进行仿真，获得残余应力分布形态，分析钢板热矫初始温度分布对残余应力分 布的影响。研究结果表明，钢板热矫初始温度沿板宽分布对残余应力有较大影响，初始温度分布越均匀残余应力值越小。 关键词：TMCP 钢板；热矫直；温度分布；残余应力 中图分类号：TG335.21 文献标识码：A doi:10.3969/j.issn.1671-7872.2009.04.005 Influence of Initial Temperature Distribution on Residual Stresses of Hot-leveled TMCP Plate LI Sheng-zhi1, 2, LI Jun1, 2, LIU Yu1, 2, HE Da-lun3 (1. School of Materials Science and Engineering, Anhui University of Technology, Maanshan 243002, China; 2. Anhui Provincial Key Lab. of Metals and Processing, Maanshan 243002, China; 3. Heavy Plate Plant of Baosteel, Shanghai 201900, China ) Abstract: The side-camber amounts of the battens longitudinally cut from the TMCP plate are governed by the residual stresses. The numerical study on the residual stresses distribution in the plate is essential for predicting the camber amounts of them. With the aid of commercial FE code MSC. SuperForm, a 3 -D coupled thermo - mechanical composite model on plate hot-leveling and followed natural cooling process was conducted and the distributions of residual stresses of the plate was obtained. The influence of initial temperature distribution on the residual stresses was analyzed. The result shows that the initial temperature