IIS能力验证测试参数石油产品-试验室能力验证管理系统.DOC

IIS能力验证测试参数 （石油类） Proficiency testing schemes for Petroleum and Petrochemical Products: Petroleum Products Internet: Product 产品名称 No. of labs 实验室数量 Provisional scope 测试参数 Crude Oil 100 Density @15oC, API Gravity, Light Ends, Mercury, Pour Point, Salt, Sediment (D473 and D4807), Sulphur, Viscosity and Water. oC密度，API燃油比重度数，轻馏分，汞，倾点，盐，沉淀物（D473和D4807），硫，粘度和水 Crude Oil Assay 20 Composition D2892, Density and Sulphur on all fractions and selected parameters on some fractions, e.g. Smokepoint on the Kerosene fraction and PIONA on a Naphtha fraction. 组成D2892，测试密度和硫在所有馏分中和在一些馏分里选择参数，如煤油馏分的烟点和石脑油馏分的PIONA组成分析 Gascondensate 40 Colour Saybolt, Density @15oC, distillation (D86), Mercury, Sulphur, Water and Vapour Pressure. 赛波特颜色，15oC密度，馏程（D86），汞，硫，水分和蒸汽压 Hydraulic Fluid (used oil) 35 Density @15oC, Kinematic Viscosity @40oC and @100oC, Total Acid Number, Flash Point PMCC, Organic Halogens (extractable and total, Water and 18 elements (wear metals: Al, Ba, Cr, Cu, Fe, Li, Mg, Mn, Mo, Na, Ni, Pb, Sn, Si, V and additives: Ca, P, Zn). 15oC密度，40oC和100oC运动粘度，总酸值，闭口闪点，有机卤素（可分离的和总的，水分和18个元素铝，钡，铬，铜，铁，锂，镁，锰，钼，钠，镍，铅，锡，硅，钒和另外的钙，磷，锌） Lubricating Oil (unused) 100 Total Acid Number, Total Base Number, Ash (Sulphated), Colour, Conradson Carbon Residue, Density @15oC, Flash Point COC, Flash Point PMCC, Kinematic Viscosity @40oC and @100oC, Viscosity Stabinger @40oC, Nitrogen, Pour Point, Sulphur, Water and 3 additives: Ca, P, Zn. 总酸值，总碱值，硫酸盐灰分，颜色，康氏残炭，15oC密度，开口闪点，闭口闪点，40oC和100oC粘度，氮，倾点，硫，水分和3个添加剂钙，磷，锌。 Lubricating Oil (used) 100 Total Acid Number, Total Base Number, Density @15oC, Flash Point PMCC, Kinematic Viscosity @40oC and @100oC, Water and 19 elements (wear metals: Ag, Al, Ba, Cr, Cu, Fe, Li, Mg, Mn, Mo, Na, Ni, Pb, Sn, Si, V and additives: Ca, P, Zn). 总酸值，总碱值，15oC密度，闭口闪点，40oC和100oC运动粘度，水分和19个元素（金属磨损：银，铝，钡，铬，铜，铁，锂，镁，锰，钼，钠，镍，铅，锡，硅，钒和添加剂钙，磷，锌）。 Naphtha 100 Colour Saybolt, Copper Corrosion 3hrs @ 50oC, Density at 15 oC, Distillation (IBP, 50% recovered, FBP), Mercaptans, Methan