光学应变规之狭缝调整设计TheAdjustmentDesignof-中华科技大学.PDF

Journal of China Institute of Technology Vol.36-2007.6 光學應變規之光學應變規之狹縫調整設計狹縫調整設計 光學應變規之光學應變規之狹縫調整設計狹縫調整設計 The Adjustment Design of Single Slit in Optical Strain Gage 1 2 謝宏榮 李恒慶 Shei Hung-Jung Lee Heng-Ching 1 中華技術學院機械工程系副教授兼教務長 2 中華技術學院機電光研究所碩士班學生 China Institute of Technology 摘摘 要要 摘摘要要 本研究主要為設計一種狹縫製作間隙調整工具 ，包含一透明刻度盤、一放大 鏡、一垂直調整機構 、兩水平調整機構、兩自旋調整機構。將兩試片固定在自旋 調整機構 ，透過透明刻度盤及放大鏡的觀察，利用垂直調整機構、水平調整機構 及自旋調整機構 ，製作調整出兩試片間所需要的狹縫間隙，以達到後續所需的要 求。與傳統黏貼技術比較，本設計可使使用者藉由影像處理迅速讀出狹縫間隙的 大小，並能容易觀察兩試片間的平行度。 關鍵詞 ：單狹縫、繞射、光學應變規 Abstract This research is mainly to design a tool which the slit gape is able to adjust. It includes a transparent degree dish, a magnifier, a perpendicular adjustment organization, two levelses components to adjust the organization and two rotation adjusted mechanism. Two slice is fixed at rotation adjusted mechanism, through the observation by this mechanism, to reach the request that the follow-up needed. Comparing to a traditional ruler to fetch the distance between the fringes within the theory of single slit, the optical strain gauge combined with the CCD system can do much more precisely and having