YGM高压悬辊磨粉机 YGM High Pressure Suspension Mill YGM高压.DOC

YGM高压悬辊磨粉机 YGM High Pressure Suspension Mill YGM高压悬辊磨粉机是在雷蒙磨粉机基础上创新改造而成的超压磨粉设备，与其它磨机相比相同等动力条件下产量提高10-20%，磨辊对物料的碾压力在高压弹簧作用下提高800-1200kg YGM high pressure suspension mill is on the basis of Raymond mill innovation and transformation of the overpressure milling equipment, compared with other mill under dynamic conditions, such as the same yields by 10-20%, roller for material of ground pressure in high pressure under the action of the spring of 800-1200 kg 成品粒度： Fineness of Product: 0.55mm-0.038mm 生产能力： Production Capacity: 0.4-22t/h 应用领域： Application Area: 冶金、矿产、建材、石油、化工、煤炭、冶炼、造纸、农业、医药、水利、水电等行业千余种原料的加工制粉。 Metallurgy, mining, building materials, petroleum, chemical, coal, metallurgy, paper making, agriculture, medicine, water conservancy, water and electricity industries thousands kinds of raw material processing and milling. 适用物料： Application Materials: 石英、长石、方解石、滑石、重晶石、萤石、稀土、大理石、陶瓷、铝矾土、锰矿、铁矿、铜矿、磷矿石、氧化铁红、锆英砂、矿渣、水渣，等莫氏硬度在9.3级以下，湿度在6%以下的各种非易燃易爆矿产物料的加工。 Quartz, feldspar, calcite, talc, barite, fluorite, rare earth, marble, ceramic, bauxite, manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, zircon sand, slag, water slag, such as Mons?hardness scale below 9.3 and moisture below 6% of all kinds of inflammable and explosive mineral materials processing. 产品介绍 Product Introduction GM高压悬辊磨粉机是在雷蒙磨粉机基础上创新改造而成的超压磨粉设备，与其它磨机相比相同等动力条件下产量提高10-20%，磨辊对物料的碾压力在高压弹簧作用下提高800-1200kg。 YGM high pressure suspension mill is on the basis of Raymond mill innovation and transformation of the overpressure milling equipment, compared with other mill under dynamic conditions, such as the same yields by 10-20%, roller for material of ground pressure in high pressure under the action of the spring of 800-1200 kg 性能特点 Features 1、与其它磨机相比相同等动力条件下产量提高10-20%，磨辊对物料的碾压力在高压弹簧作用下提高800-1200kg。 2、莫氏硬度小于9.3级的矿产物料均可加工粉碎。 3、成品粒度范围广，粒径最粗可达0.613毫米（30目），粒径一般可达0.033毫米（425目），少部分物料最细可达到0.013毫米（1000目）。 4、除尘效果完全达到国家粉尘排放标准。 5、分析机调整方便。 6、研磨装置采用重叠式多级密封，密封性能好。 1. Compared with other mill under dyn