02_整合特征辨识与知识管理的自动化模具设计.pdfVIP

整合特征辨识与知识管理的自动化模具设计 1 1 1 钟文仁 ，丁郁宏 , 李泰志 1.中原大学机械系，中坜，台湾，32023 摘要 本研究主要以CAD 软件的架构下，整合特征辨识与特征导向，规划与开发出辨识倒勾 特征并整合模具设计，自动化产生斜销及自动化分模面功能。在特征辨识方面，本研究将 对产品模型内侧倒勾的曲面、边及点的几何关系，归纳出一套辨识的规则，经由程序运算 跟判断可以自动化将倒勾辨识出来，将倒勾宽度及长度记录在特征参数中，透过抓取其参 数并计算后，可以自动化长出适合之斜销；而在特征导向方面，针对主要分模面建立一套 延伸规则的算法，将产品分模线轮廓向量与几何关系，经由程序运算与判断，让主要分模 面能够自动延伸完成。藉由标准化的设计流程，可减少 90%的鼠标点击次数及设计时间， 引导使用者快速地完成设计，并以学理化与知识化的自动功能，减少设计上的错误，提高 工作效率。 关键词：特征辨识、知识管理、模具设计、引导系统、CAD、二次开发 The Integration of Feature Recognition and Knowledge Management for Automatic Mold Design 1 1 1 Wen-Ren Jong , Yu-Hung Ting , Tai-Chih Li 1. Dept. of Mechanical Engineering, Chung Yuan Christian University, ChungLi, Taiwan ABSTRACT Under the framework of CAD software, this study developed the undercut feature recogni- tion, integrated the mold design, and automated lifter production. The study of feature recognition is based on the geometric relationship of the internal undercut surface, edge, and point of the product model, this study summarized a set of recognition rules. Through computer programming calculation and judgment, the proposed method can automatically recognize undercuts and record the undercut width and length in feature parameters. Through the acquisition and calculation of its parameters, it can automatically produce a suitable lifter. This study also developed an algorithm of extension rules for main parting surface to compute, and determined the product contour vector and geometrical relationship via computer programs. It can realize the main parting surface auto- matic extensi