3 Mechanical Properties 3 1 Tensile Strength（3机械性能3 1抗拉强度）.pdf

下载文档 降价啦

11
0
约5.48万字
约 27页
2017-08-11 发布于浙江
举报
版权申诉
保障服务

3 Mechanical Properties 3 1 Tensile Strength（3机械性能3 1抗拉强度）.pdf

1、本文档共27页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

3 Mechanical Properties 3 1 Tensile Strength（3机械性能3 1抗拉强度）

3 Mechanical Properties 3 1 Tensile Strength The stress -strain curve when tension is applied to ASTM -D638 type 1 test piece of Iupilon / NOVAREX at a strain velocity of 5mm/min is shown in Fig. 3 11. The following are the values of Iupilon / NOVAREX at room temperature. 2 = 54 ~ 64 Mp a (550 ~ 650kgf/cm ) y 2 = 59 ~ 69 Mp a (600 ~ 700kgf/cm ) b = 6 ~ 8% y = 90 ~ 140% b The temperature characteristic of the tensile yield stress of Iupilon / NOVAREX is shown in Fig. 3 12. .The influence of strain velocity is shown in Fig. Stress The relation with the tensile yield stress at a low strain velocity can be displayed by the straight line as shown in Fig. 3 13, but increases rapidly at a high strain velocity as shown in Fig. 3 1. The relation between molecular weight and tensile yield stress is shown in Fig. 3 1567. Iupilon / NOVAREX becomes t brittle break completely at Mv = 15000. Strain Fig. 3.1-1 Stress-Strain curve of Iupilon / NOVAREX y Yield stress b Breaking stress y Elongation at yield b Elongation at break tensile elongation yield