7.1 EXHAUST MANIFOLD ddcsn(7.1排气歧管ddcsn).pdf

7.1 EXHAUST MANIFOLD ddcsn(7.1排气歧管ddcsn).pdf

  1. 1、本文档共6页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
7.1 EXHAUST MANIFOLD ddcsn(7.1排气歧管ddcsn)

MBE 900 SERVICE MANUAL 7.1 EXHAUST MANIFOLD The following procedures describe the removal and installation of the exhaust manifold. 7.1.1 Exhaust Manifold Removal Remove exhaust manifold as follows: 1. Disconnect the air cleaner pipe from the turbocharger. All information subject to change without notice. (Rev. 2005) 6SE414 0404 Copyright © 2005 DETROIT DIESEL CORPORATION From Bulletin 6-MBE900-05 7-3 7.1 EXHAUST MANIFOLD 2. Remove the turbo compressor outlet pipe from the turbocharger and the charge air cooler. On 6-cylinder engines, remove the mounting bracket for the charge air pipe. See Figure 7-1. NOTE: The 4-cylinder engine is shown; the 6-cylinder engine is similar. 1. Gasket 6. Turbocharger Heat Shield 2. Oil Supply Line 7. Oil Return Hose 3. Exhaust Manifold 8. Exhaust Brake Cylinder 4. Turbo Compressor Outlet Pipe 9. Exhaust Brake Air Line 5. Exhaust Manifold Bolt 10. Exhaust Pipe Figure 7-1 Exhaust Manifold Removal 3. Remove the turbocharger oil supply and return lines. (Rev. 2005) All information subject to change without notice. 7-4 From Bulletin 6-MBE900-05 6SE414 0404 Copyright © 2005 DETROIT DIESEL CORPORATION MBE 900 SERVICE MANUAL [a] Remove the turbocharger oil supply line from the turbocharger and the oil filter. [b] Remove the oil return line from the cylinder block and the turbocharger. Collect any oil that runs out. [c] Plug all holes with a clean shop towel (turb

文档评论(0)

jiupshaieuk12 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:6212135231000003

1亿VIP精品文档

相关文档