9781585037544 ANSYS Workbench 14 （9781585037544 ANSYS Workbench 14）.pdf

® ™ ANSYS Workbench Tutorial Release 14 Structural & Thermal Analysis Using the ANSYS Workbench Release 14 Environment Kent L. Lawrence SDC Better Textbooks. Lower Prices. P U B L I C A T I O N S www.SDC Schroff Development Corporation Visit the following websites to learn more about this book: Solid Modeling Fundamentals 1-1 Chapter 1 Solid Modeling Fundamentals 1-1 OVERVIEW A simple L-shaped cross section is used to introduce basic solid modeling concepts with ANSYS DesignModeler. These tutorials explore solid modeling by: Extruding Revolving Sweeping A number of additional parametric, feature-based modeling possibilities and formulations are demonstrated in this chapter. 1-2 INTRODUCTION Solid modeling can be accomplished in a number of ways, and one favorite method involves starting with a two-dimensional shape and manipulating it to create a solid. That is the approach we will use for many of the object models created in this book. Figure 1-1 shows an L-shaped cross section that has been variously extruded, revolved, or swept along a curve to produce the solid object models shown. Figure 1-1 Extruding, revolving, sweeping an L-shaped section. 1-2 Solid Modeling Fundamentals In the following we use this simple L-shaped section as well as a circular section to illustrate the three fundamental solid modeling approaches mentioned above. 1-3 TUTORIAL 1A –