American National Standard for Safety Glazing （美国国家标准安全玻璃）.pdf

American National Standard for Safety Glazing Materials Used in Buildings -Safety Performance Specifications and Methods of Test Z97.1-1984 I Available from ASTM, 1916 Race Street, Philadelphia, PA 19103. 1. Scope and Purpose ASTM D 785-65(1981), Standard Test Method for Rockwell Hardness of Plastics and. Electrical Insulating Materials 1.1 Scope. In accordance with the scope determined by the Z97 Standards Committee, this standard establishes the specifications ASTM D 790-81, Standard Test Methods for Flexural Properties and methods of test for the safety properties of safety glazing of Unreinforced and Reinforced Plastics and Electrical Insulating Material materials (glazing materials designed to promote safety and to reduce or minimize the likelihood of cutting and piercing injuries when the glazing materials are broken by human contact) as used ASTM D 1499-64(1977), Standard Recommended Practice for for all building and architectural purposes. Operating Light- and Water-Exposure Apparatus (Carbon-Arc Type) for Exposure of Plastics 1.2 Purpose. The purpose of this standard is to prescribe the safety properties of safety glazing materials in such manner that ASTM D 2583-81, Standard Test Method for Indentation they can be used in any place in buildings for which they possess Hardness of Rigid Plastics by Means of a Barcol Impressor those mechanical and functional properties that are requisite and appropriate. Thi