Automotive Body Measurement System Capability（汽车车身测量系统能力）.PDF

Automotive Body Measurement System Capability July 1999 Auto/Steel Partnership Program Body Systems Analysis Task Force 2000 Town Center - Suite 320 Southfield, MI 48075-1123 Body Systems Analysis Task Force Disclaimer This publication is for general information only. The information contained within should not be used without first securing expert advice with respect to its suitability for any given application. The publication of this information is not intended on the part of the Body Systems Analysis Task Force of the A/SP, or any other person named in this manual, as a representation or warranty that the information is suitable for any general or particular use, or for freedom from infringement of any patent or patents. Anyone making use of the information contained herein assumes all liability arising from such use. This publication is intended for use by Auto/ Steel Partnership members only. For more information or additional copies of this publication, please contact the Auto/Steel Partnership, 2000 Town Center, Suite 320, Southfield, MI. 48075-1123 or (248) 945-7778. Final Report – July 1999 Copyright 1999 Auto/Steel Partnership. All Rights Reserved. ii Preface This report is one of a series of several reports published by the Auto/Steel Partnership Body Systems Analysis Project Team on stamping and assembly variation, body measurement systems and process validation. These reports provide a summary of the project research and are not intended to be all inclusive of the research effort. Numerous seminars and workshops have been given to individual automotive manufacturers throughout the project to aid in implementation and provide di