AX6228 Current Mode PWM Power Switch （AX6228电流模式PWM电源开关）.pdf

AX6228 Current Mode PWM Power Switch GENERAL DESCRIPTION AX6228 combines a dedicated current mode PWM controller with a high voltage power MOSFET. It is optimized for high performance, low standby power, and cost effective off-line flyback converter applications in under 16W range. AX6228 offers complete protection coverage with automatic self-recovery feature including Cycle-by-Cycle current limiting (OCP), over load protection (OLP), VDD over voltage clamp and under voltage lockout (UVLO). Excellent EMI performance is achieved with proprietary frequency shuffling technique together with soft switching control at the totem pole gate drive output. The tone energy at below 20KHZ is minimized in the design and audio noise is eliminated during operation. AX6228 is offered in PDIP-8L package. FEATURES - Power on Soft Start Reducing MOSFET VDS Stress - Frequency Shuffling for EMI - Extended Burst Mode Control For Improved Efficiency and Minimum Standby Power Design - Audio Noise Free Operation - Fixed 50KHZ Switching Frequency - Internal Synchronized Slope Compensation - Low VDD Startup Current and Low Operating Current - Leading Edge Blanking on Current Sense Input - Good Protection Coverage With Auto Self-Recovery  VDD Over Voltage Clamp and Under Voltage Lockout with Hysteresis (UVLO)  Line Input Compensated Cycle-by-Cycle Over-current Threshold Setting for Constant Output Power Limiting Over Universal Input Voltage Range  Overload Protection (OLP)  Over Voltage Protection (OVP) -