BEAM BASED ALIGNMENT AT THE POHANG （基于梁在浦项市对齐）.pdfVIP

BEAM BASED ALIGNMENT AT THE POHANG LIGHT SOURCE* J. Choi, K iman Ha, J.H. Suh, Mungyung Kim, T.- Y. L ee, PAL, San 31, Hyo ja-Dong, Pohang, 790-784, Korea Abstract This makes the total number of quadrupole families be 39 while the total number of quadrupoles are 144. A beam based alignment method was adopted to re- calibrate the Beam Position Monitors (BPM) to the 2.2 Shunt System Design center of quadrupole magnets at the Pohang Light Source (PLS). We added a shunt circuit to each The currents for the quadrupole range from 35.5A to quadrupole magnet to control the current indepen- 415.7A and we cannot expect one kind of shunt sys- dently. This alignment method involves BPM readings tem would work for all quraduploe families. Also, and shunt impedance controls at the quadurpole mag- it is very inefficient to design all different shunt sys- nets. This paper presents the beam based alignment tems for all quadrupole families. So, we designed two control mechanism, the process, and the results. kinds of shunt system which shunt off up to 15A and 50A. The first one is applied to Q1, Q2, Q3, and Q6 power supplies whose main currents are 35.5A, 83.4A, 1 INTRODUCTION 95.85A, and 186.0A respectively. The second one is In the modern synchrotron light sources, the beam off- applied to Q4 and Q5 whose main currents are 339