Cabinetry Installation（橱柜安装）.pdf

Cabinetry Installation INSTALLATION EQUIPMENT 1 #8 x 2⁄ 2” screws Small carpenter’s saw or jigsaw 1 #8 x 2⁄ 2” washer head screws Electric or hand planer Variable speed drill, electric or cordless Scribing tool and pencil Extension cord Utility knife Countersink drill bit Chalk line Drill bits, 3/16” and 1/4” Stud finder Assorted screwdriver bits Patching plaster and putty knife Phillips and flat screwdriver Sandpaper Stepladder Cedar shakes, shingles or other suitable Two 6” bar clamps or “C” clamps tapered pieces of wood for shims Steel tape measure Finishing nails Carpenter’s square Putty Stick and Touch Up Pen Carpenter’s level at least 24” in length Soft cloth Claw hammer Painter’s tape !! ALWAYS USE SCREWS, NEVER NAILS, TO INSTALL STARMARK CABINETRY. USING NAILS VOIDS THE WARRANTY. Rail