brass compression fittings Maryland Metrics（黄铜压缩配件马里兰指标）.pdf

下载文档 降价啦

14
0
约20.27万字
约 33页
2017-08-11 发布于浙江
举报
版权申诉
保障服务

brass compression fittings Maryland Metrics（黄铜压缩配件马里兰指标）.pdf

1、本文档共33页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

brass compression fittings Maryland Metrics（黄铜压缩配件马里兰指标）

legris products are available from: MARYLAND METRICS brass compression fittings Order from: Maryland Metrics email: techinfo@ ph. (800)638-1830 fx. (800)872-9329 legris products are available from: MARYLAND METRICS fractional inch compression fittings applications compression Copper, brass, aluminum, and plastic tubing. Not recommended for steel tubing. Soft plastic tubing requires support inside and in line sleeve. Maximum working pressure is 400 psi. Nominal Use long nut when excessive vibration may working pressure is 200 psi. be encountered. -65˚ to +250˚F. compression fitting components and assembly how are they assembled? 1. Use a tube cutter on the tubing to cut to length and assure a clean straight cut. nut ferrule body (sleeve or olive) 2. Prepare the end of the tube with a deburring tool to assure a surface free of burrs. 3. Slide the nut and then the ferrule onto the tube. The thread end of the nut must face out. additional turns