Design and Analysis of Stator, Rotor and Blades （设计和分析定子、转子和刀片）.pdfVIP

Design and Analysis of Stator, Rotor and Blades of Axial flow Compressor | ISSN: 2321-9939 Design and Analysis of Stator, Rotor and Blades of the Axial flow Compressor Ujjawal A. Jaiswal Prof. S. J. Joshi Institute of Technology Institute of Technology Nirma University Nirma University Ahmedabad, Gujarat, India Ahmedadabad,Gujarat,India 11mmed03@nirmauni.ac.in s.j.joshi@nirmauni.ac.in Abstract: Axial flow compressor is one of the most It is necessary to design Axial flow compressor at preliminary important parts of Gas turbine. In design of Axial flow level and require parameters can be checked at initial level so compressor the work presented comprises of basic flow further improvement can be made at primary level before start parameters and dimensions of parts, this makes the a Detailed design. further design process quite simple and the results will be The mean line prediction process as it is performed today is helpful to take further changes or improvement at the time a very quick and reliable method for compressor preliminary of detailed design. The objective of work presented is to design Typically, the results of the preliminary process are design Axial flow compressor by using mean line method obtained by time consuming manu