Desuperheater Online Programme Sizing Guidance（减温器在线项目分级指导）.pdfVIP

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. © Copyright 2016 TI-P475-06 CH Issue 3 Desuperheater Online Program Sizing Guidance Desuperheater overview In typical process plants, process steam is usually superheated, or heated to a temperature above saturation. The difference between the saturation temperature and the actual temperature of the steam is called superheat. Desuperheated steam is more efficient in the transfer of thermal energy, consequently desuperheaters are used to bring the outlet degree of superheat closer to that of saturation. Desuperheaters reduce the temperature of superheated process steam by introducing finely atomized cooling water droplets into the steam flow. As the droplets evaporate, sensible heat from the superheated steam is converted into latent heat of vaporization. A typical desuperheater installation is shown below: Combined pressure reducing / desuperheating station for venturi and spray type desuperheaters Pressure controller Steam supply Desuperheater Pressure regulating control valve