基于CAN总线和射频技术的无线数据传输系统设计.docVIP

河　南　科　技　学　院届本科毕业论文（设计） 学生姓名：所在院：所学专业：导师姓名：完成时间： Abstract Substation in power system high-voltage switchgear with communication, broken power lines and control and protection system, and other functions, but for a variety of reasons, large current switchgear in operation of high fever. Failure Measurement and monitoring high-voltage switchgear joints in temperature, is to avoid serious accident happened and control fault the important means of deterioration. For convenient, reliable and real-time temperature within high-voltage switchgear for substation monitoring, developed a CAN bus and rf technology based on the temperature monitoring system. Use nRF2402 and DS18B20 as a wireless temperature sensor nodes in the main device implements switchgear temperature collection, transmission, based on the nRF2401 rf chip and independent CAN MCP2510 wireless temperature controller chip for each temperature sensor unit complete data receiving and and superordination machine, so as to achieve the communication within the high-voltage switchgear each node temperature monitoring and alarming. This system in a 110 kV substations actual proof: system strong anti-jamming capability, temperature monitoring accurate, reliable, meeting the high-voltage switchgear temperature monitoring requirements. Wireless temperature sensor low-power and temperature detection of switchgear nodes in reliability, on time; Temperature collector and superordination machine communication of good real-time performance, stability. Through the improvement of system, can also be used in chemical industry, mining and other needs of temperature monitoring occasion. Keywords:temperature monitoring,Rf,Thecan bus,High voltage switchgear,mIcro controller 目录 1 绪论 1 1.1 研究背景和意义 1 1.2 研究的内容 1 2 系统的基本构成部分的原理 1 2.1 RFID技术的基本构成及原理 1 2.1.1 RFID的基本构成 1 2.1.2 RFID的基本原理 3 2.2 CAN总线技术 4 3 硬件系统实现 7 3.1 系统工作流程 8 3.2 无线温度采集器 12 3.3 无线温度传感器 15 4 系统的软件实现 16 4.1无线温度采集器软件实现 16 4.2无线温度传感器软件设计 20 结束语 21 参