喷射器内胶液流动数值仿真 numerical simulation of fluid flow in jetting dispenser.pdfVIP

EPE 电子工业专用设备 Equipment for Electronic Produacts Manufacturing 新技术研究 喷射器内胶液流动数值仿真 李士会,何将三,邓圭玲 中南大学机电工程学院 湖南长沙 410083 摘 要 胶液喷射技术现广泛应用于表面贴装工艺领域 在流固耦合仿真中 对流体动边界的处 理是一个难点 利用ANSYS流固耦合作用工具FSI及任意拉格朗日欧拉法对胶液喷射器内胶液流 动过程进行了研究 得到喷针运动下胶液喷射器内胶液的压力及速度分布 证明了该方法的有效 性 并得出喷针运动直接影响胶液喷射技术实现的结论 关键词 表面贴装工艺 胶液喷射分配;流固耦合;任意拉格朗日欧拉法; 中国分类号 TQ430.5 文献标识码 A 文章编号 1004-4507(2006)04-0051-04 Numerical Simulation of Fluid Flow in Jetting Dispenser LI Shi-hui, HE Jiang-san, DENG Gui-ling (College of Mechanical and Electrical Engineering, Central South University,Chang-sha 4 10083, China) Abstract: Fluid dispensing technology is widely applied in Surface Mount Technology (SMT).In numerical simulations of fluid-structure interaction, problems of moving boundary of fluid is still difficult to solve. In this paper ; we present a computational study of the j etting process using AN SYS fluid-structure interaction (FSI) analysis tools and .Arbitrary Lagrangian-Eulerian (ALE) Formulation. The distribution of pressure and velocity of adhesive in the j etting dispenser is obtained with the needle moving downwards. Results show that the solution is effective. Also the conclusion that the movement of the needle influences the accomplishment of j etting is obtained. Keywords: Surface Mount Technology; Jet dispensing; FSI; ALE 1 引 言 活塞泵式(Piston Pump)和喷射分配方式(Jet Dispensing)由于胶液喷射分配为非接触式胶液分 胶液分配技术广泛应用于表面贴装领域[1,2] 配方法 具有速度快 分配效率高及不受芯片封 常用的胶液分配方法主要有以下几种 即时间/压 装空间限制等优点 该技术正逐步取代传统的接触 力式 式胶液分配方式 在胶液喷射分配技术中