DELL 硬盘LED灯含义.docxVIP

Power-on Green indicates that the power supply is operational. Fault Red indicates a problem with the power supply (fan failure, voltage error, etc.). Power present Green indicates that power is present at the power supply and that the system is connected to a power source. 上电?绿色表示电源正常运行。?故障?红色表示是电源供应器（风扇故障，电压错误等）的问题。?电源存在?绿色表示电源在电源存在，而且该系统已连接至电源。  Component Description Power button Turns system power off and on. If you turn off the system using the power button and the system is running an ACPI-compliant operating system (such as Microsoft? Windows? 2000), the system can perform an orderly shutdown before power is turned off. If the system is not running an ACPI-compliant operating system, power is turned off immediately after the power button is pressed. The button is enabled in the System Setup program. When disabled, the button can only turn system power on. For more information, see the Users Guide and the operating systems documentation. Power indicator Provides information on power status (see Power Indicator Codes). CD and diskette drive indicators Indicates read or write access to the respective drive. hard-drive indicators Provide information on the status of the respective hard drive (see SCSI Hard-Drive Indicator Codes). NIC indicators Indicate whether the NIC has a valid link to the network (see NIC Indicator Codes). Status LCD Can signify when the system is operating correctly or when the system needs attention (see LCD Status Messages). System identification button Can be used to identify a particular system (see System Identification Indicators). NMI button Can be used to troubleshoot software and device driver errors when using certain operating systems. This button is often referred to as a force dump switch and can be pressed using the end of a paper clip. When the option is enabled in the System Setup program and the button is pressed, an NMI alerts the system. Use this button only if directed to do s