三、单选题（3. Single topic selection）.docVIP

三、单选题（3. Single topic selection） 3. Automobile use technology - single topic selection 1. To remove the tire, the tire replacement is the contents of the cars maintenance. A, daily B, grade C and ii The daily maintenance of the car is carried out by ____. A, pilot B, transportation enterprise C, maintenance enterprise 3. The engine power is not allowed to be less than the power of the engine indicated by the sign (or the products instructions). A, 55% B, 65% C, 75% The maximum design speed is not less than 100 kilometers per hour, and the maximum free transfer momentum of the steering disc is not greater than ____. A, 20 °, 30 °, 45 ° C B 5. The maximum design speed is less than 100 km/h, and the maximum free transfer momentum of the steering wheel is not greater than ____. A, 20 °, 30 °, 45 ° C B 6. When the hydraulic brake is not equipped with the automatic adjustment clearance, the pedal stroke should not be greater than the total travel of the pedal. A, 1/2b, 3/4c, 1/4 7. The ratchet type braking control device shall ensure that when the braking performance of the parking brake is reached, the number of times of reciprocating pull of the joystick shall not exceed ____. A, 3 B, 4 C, 5 times 8. The pattern depth of the tire crown of passenger car tyre is not allowed to be less than ____. A, 1.2 mm B, 1.4 mm C, 1.6 mm During the day, the front and rear of the car should be at least visible to the traffic light at least. A, 100 meters B, 60 meters C, 50 meters 10. During the day, the side steering signal of the car should be observed at least from the ____. A, 30 meters B, 40 meters C, 50 meters 11. During the day, the automobile brake lamp should be observed at least from its ____ place. A, 50 meters B, 60 meters C, 100 meters 12. Before and after the car, turn the signal lamp and the outline light to observe its working condition at night when the weather is good. A, 300 meters B, 200 meters C, 100 meters 13. The pressure reduction should not be greater than 3 min