381L直行程电子式电动执行机构-上海高特自动化仪表厂.docVIP

381L 直行程电子式电动执行机构 381L straight travel electronic actuator 产品概述 Product introduction 3810L型系列直行程全电子式电动执行器，是以AC220单相交流电源作为驱动电源，直接接受来自DCS、PLC系统或调节仪表操作器的DC4～20mA、DC0～10mA或DC1～5V控制信号来运转的全电子执行机构。电子式控制单元采用最先进的混合集成电路，被设计成匣子形状，包含完整的保护功能，可现场控制或远程控制，并用树脂浇铸密封。驱动电机采用AC可逆电机，反馈量检测采用高性能导电塑料电位器，是具有1/250分辨能力的高可靠性经济类型产品。该执行机构几乎具备了调节本身所需求的各种动作变换功能以及开度信号功能和手动功能等。 3810R series straight travel electronic actuator uses AC220 unidirectional alternating current as power supply. Working on receiving DC4～20mA, DC0～10mA and DC1～5V control signal of DCS and PLC system or controller, it is all electronic actuator moving on angle displacement. With advanced hybrid integrated circuit, electronic controlling unit is designed in the form of casket to provide whole protection. Both remote and local control is available. It is sealed with resin casting. Driving motor uses AC reversible motor. High-quality conductive plastics potentiometer is used to detect feedback quantity which is reliable economic product with 1/250resolving power. The actuator is almost equipped with all function required by adjusting, such as movement shift function, openness signal function, manual function and do on. 产品特点 1、执行器设计有伺服系统（无需另配伺服放大器），只需接入DC4～20mA（或DC1～5V）信号和AC220V单相电源即可工作。内设接线端子，接线极为简单方便。 The actuator is designed with servo system. (servo amplifier is not necessary) it can be operated when DC4～20mA (or DC1～5V) and AC220Vsignle phase power supply is connected. Binding post is installed inside, and wiring is easy and convenient.2、执行器的关键部件─控制器，采用最先进的混合集成电路，用树脂密封浇铸，外形为匣状，体积小，可靠性高。 Controller, key point of actuator, applies advanced hybrid integrated circuit. It is sealed with resin casting with appearance of casket. It is small and reliable. 3、驱动量的反馈检测采用高性能导电塑料电位器，分辨率＜0.4%。 Feedback detection of driving quantity applies high-quantity conductive plastic potentiometer, and resolution ratio is less than 0.4%.4、具备自诊断功能，当发生故障时，控制器上的指示灯会立即发出指示信号。 It is equipped with self-diagnosis function. When failure occurs, indicator l