4基于环缝张开量的异形盾构纵向等效抗弯刚度简化解析-同济大学学报.docVIP

大断面异形盾构衬砌结构纵向 张子新1,2 朱叶艇1,2朱雁飞3 黄昕1,2 同济大学 岩土及地下工程教育部重点实验室，上海 200092；2. 同济大学 土木工程学院） 异形盾构盾构纵向力学性能，表明建议值 关键词：盾构；纵向中图分类号：.U455 Study on the Longitudinal Mechanical Behavior of Large Shield Lining Structure with a Special-shaped Cross-section ZHANG Zixin1,2，ZHU Yeting1,2，ZHU Yanfei3，HUANG Xin1,2 (1. Key Laboratory of Geotechnical and Underground Engineering, Ministry of Education,Tongji University, Shanghai 200092, China; 2. Department of Geotechnical Engineering, Tongji University, Shanghai 200092, China; 3. Shanghai Tunnel Engineering Co. Ltd. , Shanghai 200233, China) Abstract: A 3D finite element model has been established to investigate the influences of various factors on the longitudinal mechanical behavior of special-shaped shield tunnel structure comprehensively. The results show that: the overall displacement along the longitudinal direction of special-shaped shield tunnel is downward, and the displacement curve can be represented by a cubic polynomial; the longitudinal effective rigidity ratio initially decreases and then increases with the magnitude of the transverse effective rigidity ratio; the effect of transverse effective rigidity ratio on the longitudinal stiffness is minor, and the recommended design value is 0.65; the longitudinal effective rigidity ratio decreases with the increasing depth under both staggered joint assembling and straight joint assembling conditions; the longitudinal reinforcing effect leads to a larger longitudinal stiffness for staggered-jointed structure than that for straight-jointed structure in soft ground; the coefficient of subgrade reaction has the most evident impact on the longitudinal effective rigidity ratio, which increases linearly with the growth of the coefficient of subgrade reaction; the amount of the longitudinal pre-tightening stress of bolts also leads to a linear increasing trend of the longitudinal effective rigidity ratio, but the impact is not obvious. Finally, a simplified analytical model based on