UMC Foundry service flow课件.pptVIP

The Introduction of UMC Foundry Process Service Flow;IC Design(IC 設計): 聯發, 威盛, 鈺創, 瑞昱…… Wafer Production(晶圓製造): Foundry: UMC, TSMC, Chartered... IDM: Intel, Winbond, Macronix….. DRAM: Micorn, ProMOS, Nanya, 力晶…... Wafer Packaging(晶圓封裝): 矽品, 日月光….. Wafer Testing(晶圓測試): 矽豐, 京元, 福雷, 聯測…..;Outline;1. The Family of UMC Global Foundry Factory;2. Foundry Production Flow;3. Order + Production Plan;3.1 The Workflow of Order Confirmation;;3.1.2 The Sample screen of Order Entry;3.1.3 Output Sample from ATP;3.2 The Application System of Production Plan in Notes;3.2.1 The Daily Workflow of Production Plan;3.2.2 Product Spec. System;3.2.3 Wafer Start Sheet System;3.2.4 晶片下線(Wafer Start)計劃表;3.2.5 IQA 進料檢驗 System;3.2.6 Mask(光罩) Tracking;3.2.7 New Pilot Run System;Demand Collaboration;Instant time-optimized (confirmed best delivery date) response to customers requests for POs and order changes Wafer start queue time reduced from weeks to days Order confirmation time reduced from days to minutes Demand fulfillment from frontend ATP integrated with backend CTP (Capable to Promise) B2B electronic interface eliminating administrative process steps Forecast/Demand/Fulfillment Collaboration Dynamic interaction for violations of specific rules of engagement Alert system for ATP changes or commitment changes;4. Front End Production;;;Stage 1: “Pilot Run” Stage This stage begins with the first lot of customer’s new product is started. CE initiate the pilot run request to PEI. Customer’s product in this stage is not verified at all Stage 2: “Pre-Production” Stage or called “Risk Run” When wafers started of one customer product has exceeded 75 pcs or customer is given future order with more than 75 pieces of wafer. Then PP will initiate the request if the product can be released for pre-production. Customer’s product in this stage is in small volume production but verification on product in not fully completed. Stage 3: “Mass Production” Stage When W/O 500 pcs or having 10 lots stable yie