云广±800kV直流安全稳定控制方案研究.PDF

2010 年 第 4 卷 第 4 期 南 方 电 网 技 术 系统、配置与方法 2010 ，Vol. 4 ，No. 4 SOUTHERN POWER SYSTEM TECHNOLOGY System, Configuration Method 文章编号：1674-0629 (2010)04-0032-05 中图分类号：TM721.1; TM712 文献标志码：A 云广±800 kV 直流安全稳定控制方案研究 1 1 1 2 2 张勇 ，徐光虎 ，余畅 ，许爱东 ，柳勇军 （1. 中国南方电网电力调度通信中心，广州510623；2. 南方电网科学研究院，广州510080 ） 摘要：分析了云广直流双极投产后的系统运行特性，经对各类控制措施的控制效果对比分析，给出了一个云广直流安全 稳定控制系统的总体框架：稳定控制措施总量以切机不超过4 800 MW 、接着切负荷不超过2 500 MW 进行控制；若超 出限制则可以采取调整再启动方案，退出直流再启动功能，降低直流输送功率或安排孤岛方式运行等措施。 关键词：云广直流系统；安全稳定控制系统；运行控制 Study on the Security-Stability Control Scheme for Yunnan  Guangdong ±800 kV DC System 1 1 1 2 2 ZHANG Yong , XU Guanghu , YU Chang , XU Aidong , LIU Yongjun (1. CSG Power Dispatching and Communication Centre, Guangzhou 510623, China; 2. Electric Power Research Institute, CSG, Guangzhou 510080, China) Abstract: Analyzing the operation characteristics of Yunnan Guangdong ±800 kV DC system being into bipolar operation, and comparing the control effects of various control measures, this paper gives an overall framework of security and stability control system for the DC system as follows: to control the DC system on a principle that the total tripping amounts are less than 4 800 MW for generators and then 2 500 MW for power loads, and to adopt measures if these limits are exceeded such as to adjust the restarting scheme, to disable the restarting function, to reduce the power transmission of the DC system or to set it into islanding operation. Key words: Yunnan  Guangdong ±800 kV DC system; security and stability control systems; operation control 云广±800 kV 直流双极投产后，南方电网的系