USB接口无线仿真器-硬件模块设计.pdfVIP

设计与研发 2015.2 USB接口无线仿真器—硬件模块设计 高 扬 （西安邮电大学,710121） 摘要：仿真技术是嵌入式微控制领域的要点和难点之一，现在科技迅猛发展，微处理的仿真已经在较为宽阔的硬件平台上有 了长足的发展，并且已经渗透到嵌入式的各个领域。USB 口的流行，渐渐的取代掉了传统机上面的并口，而市面上流行的依然 是并口的 H-JTAG 仿真器，使得流行的笔记本因没有并口而无法进行仿真。USB 无线仿真系统让电脑通过 USB 口用无线的方 式对目标版进行在线仿真和程序的下载，能使大家更简单方便的来开发嵌入式的应用领域。 本系统采用 TI 公司 MSP430 作为主控芯片，实现了一套 USB 协议转到 JTAG 协议的无线仿真系统，可支持所有 LM3S 系列 MCU 的程序的调试和下载。本论文主要研究系统整体流程和硬件模块的实现。论文在整体上主要讲解HOST模块和OBJ模块的功能 和职责，在硬件上面通过最小系统，USB模块，射频模块，JTAG模块对系统进行全面的解析，系统还有一些可扩展功能作为展 望在文章最后进行介绍。 关键词 ：JTAG;无线仿真;USB;MSP430 收稿日期：2014—9—11 USB interface wireless simulator hardware module design Gao Yang (Xian University of post and telecommunications,710121) Abstract ： Simulation technology is one of the key points and difficulties in the field of embedded microcontroller control,now the rapid development of science and technology,micro processing simulation have been relatively wide hardware platforms had great development,and has already permeated various fields of embedded.The popularity of USB port,gradually replace the traditional machine to the parallel port,and the market popular is still parallel H-a JTAG emulator,makes popular notebook for not parallel to the simulation.USB wireless simulation system to the computer through the USB port on the target in wireless way version download,online simulation and programming can make you more easy and convenient to develop embedded applications. This system adopts MSP430 TI company as the main control chip,implement a set of USB protocol to the JTAG protocol wireless simulation system,can support all LM3S series MCU program debugging and download.This thesis mainly studies syst