路的部分规范（Partial specification of road）.docVIP

路的部分规范（Partial specification of road） The roads within the 5.2.1 building base shall meet the following requirements: 1 the base shall be provided with roads connected with the urban roads, and the speed limit facilities shall be installed on the road surface at the junction of the road, and the road shall be able to access the safe exit of the building; 2 of the buildings should be pedestrian streets and the connectivity (use staircase), the distance should be less than 80m; 3 roadside greening and buildings should not affect the effective sight distance of the road when changing the direction of the road; 4 when there is an underground parking lot in the base, an effective display sign shall be provided at the entrance and exit of the vehicle. The height of the mark shall not affect the passage of people or vehicles; 5, the base traffic flow should be larger when the pedestrian road. 5.2.2 construction base road width shall comply with the following provisions: 1 cycling road width shall not be less than 4m, double car road shall not be less than 7m; 2 person row width should not be less than 1.50m; 3, the use of parking spaces on the road side should not affect the effective width of the road; 4 when changing the direction of the vehicle, the minimum turning radius should be satisfied; the fire road should be set according to the minimum turning radius of the fire engine. 5.2.3 the distance between the road and the building shall comply with the following provisions: 1 when an outdoor hydrant is installed in the base, the distance between the road and the building shall comply with the relevant provisions of the fire code; 2 the minimum distance from the road edge within the base to the buildings and structures shall be in line with the relevant provisions of the current national standard code for the planning and design of urban residential areas, GB 50180; 3, the base shall not be equipped with elevated road, and when the Elevated pedestrian road is parallel to