人工免疫网络在数控机床故障诊断中的应用 research on application of artificial immune network in cnc machine tools fault diagnosis.pdfVIP
- 1
- 0
- 约9.96千字
- 约 4页
- 2017-08-15 发布于上海
- 举报
人工免疫网络在数控机床故障诊断中的应用 research on application of artificial immune network in cnc machine tools fault diagnosis
l陋衄—豳
人工免疫网络在数控机床故障诊断中的应用
Researchon ofArtificialImmuneNetwork
Application
inCNC
MachineTool’S
Fault
Diagnosis
王家海1’2 范文2
(1同济大学机械工程学院,上海201804;2同济大学中德学院,上海200092)
摘 要:分析了生物免疫系统的免疫调节机制,在此基础上讨论采用人工免疫网络模型进行机床故障诊断
的可行性。将该模型用于滚动轴承故障诊断实验,并将实验结果与传统BP神经网络进行了对比分析,验证了算
法的有效性。
您可能关注的文档
- 让一级换热代替三级换热成为可能.pdf
- 扰动观测器和等价性 disturbance observer and its equivalence.pdf
- 让指标管理全起来动.pdf
- 扰动自适应预测控制技术在主蒸汽温度控制优化中的应用 application of disturbance adaptive predictive control in temperature control of main steam.pdf
- 扰动式煤粉燃烧器节油改造关键技术及其应用研究 key technologies for oil-saving retrofit of large-scale turbulent pulverized coal burners based on numerical simulation and application study thereof.pdf
- 绕线式无刷双馈电机转子绕组设计 design of rotor winding for brushless doubly-fed wound-rotor machine.pdf
- 绕线方式和互感对开关磁阻电机发电性能的影响 compare the generating-performance of the different wire winding modes and mutual inductance influence of the switched reluctance machine.pdf
- 绕线电机启动状态到双馈状态过渡过程的研究 research on the transient process from starting state to double-fed state of winding motor.pdf
- 绕线机转子侧交-交变频调速的机械特性研究 research on the mechanical properties of rotor side while regulating speed by changing frequency.pdf
- 绕线式异步电机双馈调速系统控制分析 double-fed speed-regulating control and analysis of asynchronous motor.pdf
原创力文档

文档评论(0)