层状矿体等高线离散化后的四面体建模.pdf

第40 卷 第4 期 煤田地质与勘探 Vol. 40 No.4 2012 年8 月 COAL GEOLOGY EXPLORATION Aug. 2012 文章编号: 1001-1986(2012)04-0012-04 层状矿体等高线离散化后的四面体建模 陈应显，王志宏 (辽宁工程技术大学资源与环境工程学院，辽宁 阜新 123000) : 基于不规则四面体的三维实体建模方法具有很多优点，但在层状矿体的建模中，该方法却 不能准确地描述其层状界面。根据层状矿体建模数据的特点，先将层状矿体的等高线进行等距离 散化，再建立不规则四面体三维实体模型，并为该方法设计由点、面和四面体组成的逻辑模型结 构。该方法用VC++.net 编程得以实现，并使用内蒙某煤矿的实际数据，建立了相应的矿床三维实 体模型。实践表明，通过离散化等高线后建立的层状矿体四面体模型，能够准确反映出层状矿体 的层状界面，实现对层状矿体的三维实体建模。 ：矿床三维模型；不规则四面体；等高线离散化 ：TP399 ：A DOI: 10.3969/j.issn.1001-1986.2012.04.003 Tetrahedral model of layered ore body based on discrete contours CHEN Yingxian，WANG Zhihong (College of Resource and Environment Engineering, Liaoning Technical University , Fuxin 123000, China) Abstract: The method of 3D solid modeling of irregular tetr ahedron has many advantages, but the method can not accurately describe the layered interface in the layered ore modeling. According to the characteristics of the layered ore, the 3D sol id modeling of irregular tetra hedral was established based o n equidistance discrete conto ur. The logical model structure of this method formed point, face an d tetrahedron. The method has been realized by pro- gramming with VC++.net. A 3D solid model of irregular tetr ahedron has been established by actual data of a coal mine. Practice shows that the method can establish 3D solid model and accurately describe the ore body of the lay- ered interface. Key words: 3D model of deposit; irregular tetrahedron; discrete contour