3前置预旋导轮psv-中船澄西船舶修造有限公司.ppt

1.辅机废热利用系统安装A/E WASTE HEAT RECOVERY INSTALLATION 系统简图 system diagram Circular pump steam A/E exhaust gas Condensate water A/E exhaust gas boiler Steam pressure 6-7 bar General washing 1.辅机废热利用系统安装A/E WASTE HEAT RECOVERY INSTALLATION 2.机舱风机变频改装E/R VENT. MACHINE VFD REFIT 改装必要性 Refitting Demand 改装简介 General Description 常规机舱通风系统按所有机舱设备同时使用的夏季标准工况进行设计， 实际使用时船舶设备很难达到设计时工况，存在风机多余工况的浪费,间接 造成燃油的浪费。 Generally, E/R vent. capacity is designed in accordance with the summer condition, vent. Capacity could be wasted while the actual condition is below that design condition. 机舱风机变频改装包括：主/应急配电板上机舱风机启动单元修改和 新设三个风机变频控制单元和一个机舱风机控制板-EFCP。改装后，利用 变频控制系统可以有效解决风机多余工况的问题，降低电力消耗。 The refit job is mainly include the vent. Machine start unit modification, install 3 variable-frequency control unit and 1 control panel. Electricity consumption could be reduced by adjusting ventilation capacity in accordance with the service environmental condition. 2.机舱风机变频改装E/R VENT. MACHINE VFD REFIT 3.中央淡水冷却系统变频改装CENTRAL FW COOLING SYSTEM VFD REFIT 改装必要性 Refitting Demand 改装简介 General Description 常规中央淡水冷却系统按所有机舱设备同时使用的热带夏季标准工况 进行设计。实际使用时，受热情况取决于设备运转负荷和海水初始温度， 但是海水泵由于流量无法自动调节，导致海水泵多余工况的浪费。 Generally, the central FW cooling water system is designed in accordance with the summer standard condition. Extra cooling SW flux could be wasted since the flux can not be adjusted according to the actual service condition. 中央冷却淡水系统变频改装包括：主配电板上主海水泵启动单元修 改和新设两个主海水泵变频控制单元。改装后利用变频控制可以有效解决 海水泵多余工况的问题，降低电力消耗。 The refit job mainly include: main SW pump start unit modification and Install 2 variable-frequency control unit for the s main SW pump. After refitting Electricity consumption could be reduced by adjusting the cooling SW flux in accordance with the actual operation condition 3.中央淡水冷却系统变频改装CENTRAL FW COOLING SYSTEM VFD REFIT 4.汽缸油注油器改造CYL OIL LURICATOR REFIT 改装必要性 Refitting Demand 改装简介 General Description 机械式注油改Alpha注油可降低气缸滑油量，降低排放，优化缸套