ultraiso使用方法（The use of UltraISO method）.doc

ultraiso使用方法（The use of UltraISO method） [turn] UltraISO usage (how to make U disk WinPE boot disk) in 2011 05 Saturday 21 October morning 12:36 gaotaocool 455611934UltraISO reproduced from the final editing method of use 1, browse the CD image file in which the direct extraction and Objective: to extract the disc image content directly, without CD or virtual CD-ROM software Methods: open and extract the files or folders (UltraISO can support 27 common disc image format) Key points: extract files can be used to extract feature and then specify the destination directory; also can choose the path and drag and drop in the interface below the local browser. 2, the disc is made into ISO, stored on the hard drive Objective: backup for the virtual CD-ROM content, or after burn Methods: the use of CD image function, choose CD-ROM, according to production on it. Key points: UltraISO by Sector copy, so you can make a bootable CD image, still can start after recording. However, UltraISO does not support copy music CDs, DVDs and video game VCD encryption. 3, will have to solve in the file on the hard disk into ISO Purpose: to burn or use virtual Methods: to create a new ISO file, the file or directory from the interface below the local browser disc drag and drop to the top of the browser, you can save the last. Key: DVD image file UltraISO can create 10GB, if CD-R, pay attention to the top of the total size, to avoid the capacity limit exceeded. In addition, DVD image advice and choose the UDF CD image select Joliet on it. 4, start the CD-ROM production Objective: to make the system can directly start the CD Methods: document preparation ibid, key is to set the correct boot file . The use of Windows 98 setup.img, Windows NT/2000/XP w2ksect.bin. If you dont have it, you can download tools EasyBoot, there are two files in the disk1ezboot installation directory under. In addition, UltraISO can directly start from disk boot file extraction (.Bfi), or to make a bootable floppy disk