喷浆施工方案（Shotcrete construction scheme）.docVIP

喷浆施工方案（Shotcrete construction scheme） Medical practitioner qualification examination in 2014 a comprehensive written oral clinic physician practicing physicians practicing doctors of traditional Chinese medicine ambition -- mixing concrete -- preliminary spray - Spray - maintenance. 2, the construction process?? using the PZ-VII type spraying machine sprayed concrete. ? three, the construction organization and construction organization, the 1 time?? every class has 13 people, a 1 member security monitor, 1, jet 2, feeding 2, mix 3, transport 4. ? the personnel organization and monitor in charge of the class according to the management of construction and safety standards. ? supervision safety supervision and management and standard of construction safety officer in charge of the class. A person in charge of work? Jet spraying operation, a person in charge of the light, observation of injection, injection of quality assurance. ? on the feed industry responsible to spraying machine filled concrete mixing well. Banliao? Workers responsible for material according to the proportion of the material ratio, mixing. Trucker? Responsible for material transportation work. ? four, construction safety measures? 1, injection before the start of the work, should first place in jet covered old belt, in order to collect the rebound material, rebound rate shall not exceed 15%, if there is a small amount of water injection site, can increase the accelerator incorporation, if the water point set in, can be set good drainage tube, then spray. ? 2, before the first use of high pressure water spray, wash., remove dust and loose coal for the active carbon, which help wet coal. ? 3, before the spraying, close to the steel bar net in coal help loosen, and make the coal gap help keep 30mm. ? 4, injection order from top to bottom, and the spray nozzle central distance control in about 1m, the jet direction is perpendicular to the surface by spraying, the deviation should not exceed 5 degrees.